View JBY-25S-1A1A_7350001.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

514 part name material and finish current rating voltage rating temperature range contact resistance insulation resistance withstanding voltage connector plug receptacle contact insulator shell contact insulator shell brass, nickel-undercoated, selective gold-plated or copper-undercoated, tin-plated glass-filled pbt, ul94v-0, black mild steel, copper-undercoated, tin/lead-plated phosphor bronze, nickel-undercoated, selective gold-plated or copper-undercoated, tin-plated glass-filled pbt, ul94v-0, black mild steel, copper-undercoated, tin/lead-plated 3a, ac, dc (2a for 37-circuits) 250v ac, dc - 40 ? c to + 85 ? c (including temperature rise in applying electrical current) initial value/15m ? max. after environmental testing/30m ? max. 5,000m ? min. 1,000v ac/minute d subminiature connector j series solder pot plug and receptacle d-sub j solder pot plug solder pot plug and receptacle CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC 01 specifications CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC series name shell size: e, a, b ,c wire connection style: z ... solder pot type number of circuits: 9, 15, 25, 37 connector style: p ... plug, s ... receptacle finish blank ... gold-plated (flash) 12 ... 0.2micron(8micro-inch) gold-plated 13 ... 0.4micron(16micro-inch) gold-plated 14 ... 0.76micron(30micro-inch) gold-plated 90 ... tin-plated jez 9p 12 solder pot receptacle ? the receptacle contacts are formed by high-speed stamping presses to obtain the advantages of cold working. they are therefore highly elastic, which in turn ensures reliable connection even after many mating cycles. ? the dimples in the plug shell ensure continuity between it and the receptacle shell, thus providing complete shielding. ? costs are kept low by selective gold plating the contacts. ? the solder cup portions of the contacts are tin-plated for easy soldering. ? insulator housings are made of a heat-resistant glass-filled pbt resin. features CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC note: 1. the relationship between number of circuits and shell size is shown below. 9: e, 15: a, 25: b, 37: c 2. contact jst for special plating requirements. note: contact jst for details. 55 standards CCCCCCCCCCCCCCCCCCCCCC 0 recognized e60389 1 certified lr20812
515 plug CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC b c a 3.05(.120)dia. 12.55(.494) 8.35(.329) 10 [10.72(.422)] [5.95(.234)] 2.84(.112) q ty / box circuits model no. gold-plated tin-plated a b c dimensions mm(in.) 9 15 25 37 jez- 9p jaz-15p jbz-25p jcz-37p jez- 9p-90 jaz-15p-90 jbz-25p-90 jcz-37p-90 16.92( .666) 25.25( .994) 38.97(1.534) 55.43(2.182) 24.99( .984) 33.32(1.321) 47.04(1.852) 63.50(2.500) 30.80(1.213) 39.14(1.541) 53.04(2.088) 69.32(2.729) 100 100 50 50 receptacle CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC b c a 3.05(.120)dia. 12.55(.494) 7.9(.311) [10.9(.429)] 6.18 (.243) 2.84(.112) 10 q ty / box circuits model no. gold-plated tin-plated a b c dimensions mm(in.) 9 15 25 37 jez- 9s jaz-15s jbz-25s jcz-37s jez- 9s-90 jaz-15s-90 jbz-25s-90 jcz-37s-90 16.34( .643) 24.67( .971) 38.38(1.511) 54.84(2.159) 24.99( .984) 33.33(1.312) 47.04(1.852) 63.50(2.500) 30.80(1.213) 39.14(1.541) 53.04(2.088) 69.32(2.729) 100 100 50 50 d subminiature connector j series
516 right angle through-hole plug (with hexagonal lock screw blocks) right angle through-hole receptacle (with spring lock devices) right angle through-hole plug and receptacle CCCCCCCCCCCCCCCCC 01 right angle through-hole receptacle (with rectangular lock screw blocks) ? the receptacle contacts are made by high-speed stamping presses. this promotes the uniform elasticity of the twin-contact mating sections and therefore ensures reliable contact even after repeated mating cycles. the solder tails are u-shaped for extra strength. ? costs are minimized by selective gold plating, high speed stamping presses, and completely automated assembly. ? to ensure complete shielding, a wide variety of grounding adapters are available so that the receptacles can be grounded to different kinds of supporting structures. ? metric, inch or other lock screw blocks are available for fastening mating plugs. features CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC d subminiature connector j series right angle through-hole plug and receptacle d-sub j
517 specifications CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC part name material and finish contact of plug contact of receptacle insulator shell hexagonal lock screw block rectangular lock screw block grounding adapter having a 3.2mm(.126") dia. hole grounding adapter having an m3 tapped hole grounding adapter having a spring lock lever brass, nickel-undercoated, selective gold-plated or copper-undercoated, tin/lead-plated phosphor bronze, nickel-undercoated, selective gold-plated or copper-undercoated, tin/lead-plated glass-filled pbt, ul94v-0, black mild steel, copper-undercoated, nickel-plated mild steel, copper-undercoated, nickel-plated zinc, copper-undercoated, nickel-plated mild steel, copper-undercoated, nickel-plated brass, copper-undercoated, tin/lead-plated series name shell size: e, a, b ,c wire connection style: y... right angle through-hole style number of circuits: 9, 15, 25, 37 connector style: p ... plug, s ... receptacle connector construction/dimensions: standard j series types of grouding adapters 0 ... without grounding adapters 1 ... with grounding adapters having a 3.2mm(.126") dia. hole 2 ... with grounding adapters having an m3 thread 3 ... with grounding adapters having a spring lock device (1) 4 ... with grounding adapters having a spring lock device (2) types of lock screw blocks a ... with hexagonal lock screw blocks having a no. 4-40 unc inch thread b ... with hexagonal lock screw blocks having an m2.6 thread c ... with rectangular lock screw blocks having an m2.6 thread d ... without lock screw blocks e ... without lock screw blocks, but with grounding adapters having a 3.05mm(.120") dia. hole f ... without lock screw blocks, but with grounding adapters having a no. 4-40unc inch thread g ... without lock screw blocks, but with grounding adapters having an m2.6 thread h ... without lock screw blocks, but with grounding adapters having an m3 thread finish blank ... gold-plated (flash) 12 ... 0.2micron(8micro-inch) gold-plated 13 ... 0.4micron(16micro-inch) gold-plated 14 ... 0.76micron(30micro-inch) gold-plated 90 ... tin-plated je y 9 s 1a 3 a 12 s1 spring lock devices blank...without spring lock devices s or s1...with spring lock devices model number identification materials current rating voltage rating temperature range contact resistance insulation resistance withstanding voltage applicable pc board thickness 3a, ac, dc (2.0a ac, dc for 37-circuits) 250v ac, dc - 40 ? c to + 85 ? c (including temperature rise in applying electrical current) initial value/15m ? max. after environmental testing/30m ? max. 5,000m ? min. 1,000v ac/minute 1.6mm(.063") characteristics note: contact jst for details. note: 1. the relationship between number of circuits and shell size is shown below. 9: e, 15: a, 25: b, 37: c 2. contact jst for special plating requirements. 3. contact jst for the receptacle with spring lock devices. (not ul recognized nor csa certified.) d subminiature connector j series standards CCCCCCCCCCCCCCCCCCCCCC 0 recognized e60389 1 certified lr20812
518 d subminiature connector j series m2.6 no.4-40unc right angle through-hole plug type a type b without grounding adapters with grounding adapters with a 3.2mm (.126") dia. hole with grounding adapters with an m3 thread with grounding adapters with a spring lock device (1) with grounding adapters with a spring lock device (2) with hexagonal lock screw blocks (h: 6.3mm (.248")) having a no.4-40unc inch thread with hexagonal lock screw blocks (h: 6.3mm (.248")) having an m2.6 thread 0a 0b 1a 1b 2a 2b 3a 3b 8.35(.329) [18.6(.732)] 5.95 (.234) a b c 12.55(.494) 3.2 (.126) 0.75 (.030) e 0.6 (.024) d 2.84 (.112) h 2.84 (.112) 10 q'ty / box model no. dimensions mm(in.) abc tin-plated plug jey- 9p-1a** jay-15p-1a** jby-25p-1a** jey- 9p-1a**90 jay-15p-1a**90 jby-25p-1a**90 16.90( .665) 25.25( .994) 38.97(1.534) 24.99( .984) 33.33(1.312) 47.04(1.852) 30.80(1.213) 39.14(1.541) 53.00(2.087) 100 60 40 cir- cuits 9 15 25 gold-plated plug note: ** shows the location where a two-digit code (see the table below for codes) should be entered. for example, if a 9-circuit gold-plated plug with hexagonal lock screw blocks having a no.4-40unc inch thread and without grounding adapters is required, specify the model number as jey-9p-1a0a. h: height of the lock screw block (for types a, b & c) de 8.1(.319) 8.1(.319) 8.2(.323) 9.52(.375) 9.52(.375) 9.62(.379)
519 d subminiature connector j series m3 m2.6 no.4-40unc 3.05mm (.120")dia. hole m2.6 type c type d type e type f type g type h 0c 0d 1c 1d 2c 2d 3c 3d 1e 1f 2e 2f 3e 3f 1g 2g 3g with rectangular lock screw blocks (h: 6.2mm (.244")) having an m2.6 thread without lock screw blocks without lock screw blocks e: grounding adapter has no thread. f, g, h: grounding adapters have a thread (*1) for securing separately-purchased lock screw blocks (*2) use a lock screw block of model number jfs-( )s-c1n. *1: no.4-40unc inch thread *2: model number jfs-4s-( )1w(m) *1: m2.6 thread *2: model number jfs-2.6s-( )1w(m) *1: m3 thread *2: model number jfs-3s-( )1w(m) 4h
520 d subminiature connector j series m2.6 no.4-40unc right angle through-hole receptacle type a type b without grounding adapters with grounding adapters with a 3.2mm (.126") dia. hole with grounding adapters with an m3 thread with grounding adapters with a spring lock device (1) with grounding adapters with a spring lock device (2) with hexagonal lock screw blocks (h: 6.3mm (.248")) having a no.4-40unc inch thread with hexagonal lock screw blocks (h: 6.3mm (.248")) having an m2.6 thread 0a 0b 1a 1b 2a 2b 3a 3b [18.8(.740)] 6.18 (.243) a b c 12.55(.494) 3.2 (.126) 0.7 (.028) e 0.6 (.024) d 2.84 (.112) h 2.84 (.112) 7.9(.311) 10 q'ty / box model no. dimensions mm(in.) abc tin-plated receptacle jey- 9s-1a** jay-15s-1a** jby-25s-1a** jcy-37s-1a** jey- 9s-1a**90 jay-15s-1a**90 jby-25s-1a**90 jcy-37s-1a**90 16.34( .643) 24.67( .971) 38.38(1.511) 54.84(2.154) 24.99( .984) 33.32(1.312) 47.04(1.852) 63.50(2.500) 30.81(1.213) 39.14(1.541) 53.04(2.088) 69.32(2.729) 100 60 40 40 cir- cuits 9 15 25 37 gold-plated receptacle note: ** shows the location where a two-digit code (see the table below for codes) should be entered. for example, if a 9-circuit gold-plated plug with hexagonal lock screw blocks having a no.4-40unc inch thread and without grounding adapters is required, specify the model number as jey-9s-1a0a. h: height of the lock screw block (for types a, b & c) de 8.1(.319) 8.1(.319) 8.2(.323) 8.2(.323) 9.52(.375) 9.52(.375) 9.62(.379) 9.62(.379)
521 d subminiature connector j series m3 no.4-40unc m2.6 3.05mm (.120")dia. hole m2.6 type c type d type e type f type g type h 0c 0d 1c 1d 2c 2d 3c 3d ee ee 1e 1f 2e 2f 3e 3f ee ee 1g e 2g e 3g e e with rectangular lock screw blocks (h: 6.2mm (.244")) having an m2.6 thread without lock screw blocks without lock screw blocks e: grounding adapter has no thread. f, g, h: grounding adapters have a thread (*1) for securing separately-purchased lock screw blocks (*2) used a lock screw block [model number jfs-( )s-c1n] *1: no.4-40unc inch thread *2: model number jfs-4s-( )1w(m) *1: m2.6 thread *2: model number jfs-2.6s-( )1w(m) *1: m3 thread *2: model number jfs-3s-( )1w(m) 4h
522 d subminiature connector j series pc board layout (viewed from component side) CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC hkh (9 circuits) (15 circuits) (25 circuits) (37 circuits) panel layoutCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC the connector can be mounted either on the front side or on the rear side of the panel as shown above. use m2.5 or m2.6 screws for installation. mounting on the rear side mounting on the front side b 10
523 d subminiature connector j series straight through-hole plug and receptacle d-sub j straight through-hole plug (with hexagonal lock screw blocks) straight through-hole plug and receptacleCCCCCCCCCCCCCCCCCCCCC 01 straight through-hole receptacle (without lock screw blocks, but with grounding adapters having a no.4-40unc inch thread) ?three standard types are available with different dimensions between the flange and solder tail: 6mm (.236"), 9mm (.354"), and 12mm (.472"). ?the roots of the contact leads are covered to prevent flux from rising into the connector during soldering. ?a grounding adapter with a spring lock device allows the connector to be temporarily secured onto the printed circuit board so that the connector can be soldered easily. standards CCCCCCCCCCCCCCCCCCCCCC 0 recognized e60389 1 certified lr20812 features CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC k fkm k fkm k fkm
524 d subminiature connector j series part name material and finish contact insulator shell heaxagonal lock screw bock grounding adapter with spring lock device plug receptacle brass, nickel-undercoated, selective gold-plated phosphor bronze, nickel-undercoated, selective gold-plated glass-filled pbt, ul94v-0, black mild steel, copper-undercoated, nickel-plated mild steel, copper-undercoated, nickel-plated brass, copper-undercoated, tin/lead-plated current rating voltage rating temperature range contact resistance insulation resistance withstanding voltage applicable pc board thickness 3.0a ac, dc 250v ac, dc - 40?c to + 85?c (including temperature rise in applying electrical current) initial value/15m ? ? ? specifications CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC *contact jst for details. no.4-40unc 3a with hexagonal lock screw blocks (h: 6.3mm (.248")) having a no.4-40unc inch thread type a straight through-hole plug with grounding adapters with a spring lock device 6 mm (.236") type 9 mm (.354") type 12mm (.472") type a b c h 6.0 (.236) 9.0 (.354) 5.95 (.234) 3.5 (.138) 2.7 (.106) 12.55(.494) 8.35(.329) [15.04(.592)] 7.6(.300) 2.84(.112) h 12.0 (.472) h 2.84(.112) 3.2 (.126) 0.5(.020) 2.7 (.106) d d 3.5 (.138) 5.95 (.234) 3.2 (.126) [21.04(.828)] 2.7 (.106) 3.5 (.138) 5.95 (.234) [18.04(.710)] 3.2 (.126) 10 note: ** shows the location where a two-digit code (see the table below for codes) should be entered. for example, if a gold-plated (flash) receptacle with hexagonal lock screw blocks having a no. 4-40unc inch thread and without grounding adapters whose dimension between flange and solder tail is 6mm(.236") is required, specify the model number as jbs-25p-2a3a. d dd q'ty / box model no. 100 cir- cuits 9 h: height of the lock screw block (for types a, b & j) gold-plated (flash) plug dimension between flange and solder tail mm(in.) jes- 9p-2a** jes- 9p-3a** jes- 9p-4a** 6 (.236) 9 (.354) 12 (.472) 25 jbs-25p-2a** jbs-25p-3a** jbs-25p-4a** 6 (.236) 9 (.354) 12 (.472) gold-plated 0.76micron(30micro-inch) jes- 9p-2a**14 jes- 9p-3a**14 jes- 9p-4a**14 jbs-25p-2a**14 jbs-25p-3a**14 jbs-25p-4a**14 40 abcd dimensions mm(in.) 16.90 (.665) 24.99 (.984) 30.8 (1.213) 2.4 (.094) 38.97 (1.534) 47.04 (1.852) 53.0 (2.087) 2.5 (.098)
525 series name shell size: b, e wire connection type: s ... straight through-hole type number of circuits: 9, 25 connector type: p ... plug s ... receptacle connector construction/dimensions: 2a ... 6 mm (.236") from flange to solder tail 3a ... 9 mm (.354") from flange to solder tail 4a ... 12mm (.472") from flange to solder tail types of grouding adapter: 3 ... grounding adapter with a spring lock device types of lock screw block: a ... with hexagonal lock screw blocks having a no. 4-40unc inch thread b ... with hexagonal lock screw blocks having an m2.6 thread f ... without lock screw blocks, but with grounding adapters having an no.4-40unc inch thread g ... without lock screw blocks, but with grounding adapters having an m2.6 thread h ... without lock screw blocks, but with grounding adapters having an m3 thread j ... with hexagonal lock screw block having an m3 thread finish blank ... gold-plated(flash) 12 ... 0.2micron(8micro-inch)gold-plated 13 ... 0.4micron(16micro-inch)gold-plated 14 ... 0.76micron(30micro-inch)gold-plated 90 ... tin-plated ? j bs25 ? p2a3 f14 s1 spring lock devices blank...without spring lock devices s or s1...with spring lock devices note: 1. in the j series, the number of circuits is determined by the shell size: 9 circuits for e and 25 circuits for b. 2. contact jst for special plating requirements. 3. contact jst for the dimensions between the flange and solder tail other than those listed above. 4. grounding adapters that can secure printed circuit boards are also available. nn d subminiature connector j series m3 m3 m2.6 no.4-40unc m2.6 type b without lock screw blocks f, g, h: grounding adapters have a thread (*1) for securing separately- purchased lock screw blocks (*2) type f type g type h type j with hexagonal lock screw blocks (h: 6.3mm(.248")) having an m2.6 thread *1: no.4-40unc inch thread *2: model number sfs-4s-( )1w(m) *1: m2.6 thread *2: model number sfs-2.6s-( )1w(m) *1: m3 thread *2: model number sfs-3s-( )1w(m) with hexagonal lock screw blocks (h: 6.3mm (.248")) having an m3 thread 3b 3f 3g 3h 3j
526 d subminiature connector j series 3a with hexagonal lock screw blocks (h: 6.3mm (.248")) having a no.4-40unc inch thread type a straight through-hole receptacle with grounding adapters with a spring lock device 6 mm (.236") type 9 mm (.354") type 12mm (.472") type no.4-40unc a b c d 6.0 (.236) 6.18 (.243) 2.7 (.106) 12.55(.494) 7.9(.311) [15.38(.606)] 7.6(.300) 2.84(.112) 2.84(.112) 3.2 (.126) 0.5(.020) 2.7 (.106) [21.38(.724)] 2.7 (.106) [18.38(.724)] hd hd h 6.18 (.243) 6.18 (.243) 9.0(.354) 12.0(.472) 6.0 (.236) 6.0 (.236) 3.2 (.126) 3.2 (.126) 10 cir- cuits dimension between flange and solder tail mm(in.) model no. gold-plated (flash) receptacle gold-plated 0.76micron(30micro-inch) dimensions mm(in.) abcd q'ty / box 9 25 6(.236) 9(.354) 12(.472) 6(.236) 9(.354) 12(.472) jes- 9s-2a** jes- 9s-3a** jes- 9s-4a** jbs-25s-2a** jbs-25s-3a** jbs-25s-4a** tin-plated - - - jbs-25s-2a**90 jbs-25s-3a**90 - jes- 9s-2a**14 jes- 9s-3a**14 jes- 9s-4a**14 jbs-25s-2a**14 jbs-25s-3a**14 jbs-25s-4a**14 16.34 (.643) 38.38 (1.511) 24.99 (.984) 47.04 (1.852) 30.8 (1.213) 53.0 (2.087) 2.4 (.094) 2.5 (.098) 40 h: height of the lock screw block (for types a, b & j) note: ** shows the location where a two-digit code (see the table below for codes) should be entered. for example, if a gold- plated (flash) receptacle with hexagonal lock screw blocks having a no. 4-40unc inch thread and without grounding adapters whose dimension between flange and solder tail is 6mm(.236") is required, specify the model number as jes-9s-2a3a. 100 pc board layout CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC fkm fkhm 5.49 0.05 (.216 .002) 2.84 0.05 (.112 .002) 1.37 0.05 (.054 .002) 4.11 0.05 (.162 .002) 24.99 0.05(.984 .002) 2---3.05 0.05 (.120 .002)dia. 9---1.0 (.039 )dia. + 0.1 0 + .004 0 2.74 0.05(.108 .002) 2.84 0.05 (.112 .002) 47.04 0.05(1.852 .002) 2---3.05 0.05 (.120 .002)dia. 1.40 0.05(.055 .002) 25---1.0 (.039 )dia. + 0.1 + .004 0 0 16.56 0.05(.652 .002) 4.14 0.05 (.163 .002) 13.82 0.05(.544 .002) 11.05 0.05(.435 .002) 8.28 0.05(.326 .002) 5.54 0.05(.218 .002) 15.19 0.05(.598 .002) 12.42 0.05(.489 .002) 9.68 0.05(.381 .002) 6.91 0.05(.272 .002) 2.77 0.05 (.109 .002)
527 panel layoutCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC b 10 c a 4 --- 1.6r 2 --- 3.2 0.1 (.126 .004)dia. circuits a 0.15( .006) b 0.2( .008) c 0.2( .008) 9 25 24.99( .984) 47.04(1.852) 20.6( .811) 42.6(1.677) 12.0(.472) 12.0(.472) d subminiature connector j series type b without lock screw blocks f, g, h: grounding adapters have a thread (*1) for securing separately- purchased lock screw blocks (*2) type f type g type h type j with hexagonal lock screw blocks (h: 6.3mm (.248")) having an m2.6 thread *1: no.4-40unc inch thread *2: model number sfs-4s-( )1w(m) *1: m2.6 thread *2: model number sfs-2.6s-( )1w(m) *1: m3 thread *2: model number sfs-3s-( )1w(m) with hexagonal lock screw blocks (h: 6.3mm (.248")) having an m3 thread 3b 3f 3g 3h 3j m2.6 no.4-40unc m2.6 m3 m3
528 d subminiature connector j series crimp style plug and receptacle d-sub j connector material and finish part name plug receptacle pin contact insulator shell socket contact insulator shell brass, nickel-undercoated, selective gold-plated or copper-undercoated, tin-plated glass-filled pbt, ul94v-0, black mild steel, copper-undercoated, tin/lead-plated phosphor bronze, nickel-undercoated, selective gold-plated glass-filled pbt, ul94-0, black mild steel, copper-undercoated, tin/lead-plated pin contact crimp style plug and receptacle CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC 01 specifications CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC contact series name product shape: s ... chain, b ... loose piece type of contact: p ... pin contact, s ... socket contact applicable wire: 1 ... awg #24 to #20, 2 ... awg #28 to #24 material: 1 ... brass(pin contact), 3 ... phosphor bronze(socket contact) finish 40 ... gold-plated (flash) 42 ... 0.2micron(8micro-inch) gold-plated 43 ... 0.4micron(16micro-inch)gold-plated 44 ... 0.76micron(30micro-inch) gold-plated 90 ... tin-plated note: contact jst for special plating requirements. housing series name shell size: e, a, b ,c wire connection style: c ... crimp style number of circuits: 9, 15, 25, 37 connector style: p ... plug, s ... receptacle note: the relationship between number of circuits and shell size is shown below. 9: e, 15: a, 25: b, 37: c p ? 1 240 s j ? j e c 9 p socket contact the contacts of this plug are formed by high-speed stamping presses into continuous strips that can be automatically fed into our compact crimping machines. much less time is required to assemble crt and rs-232c round cables using this plug than when soldering connections. the contacts in this connector are selectively gold-plated. moreover, jst's advanced technological knowledge and experience are fully utilized to significantly reduce production costs. the dimples in the connector shell provide the ground connection and are important factors in preventing electromagnetic interference. the contact has a lance that can be visually checked during assembly. this assures accurate assembly and reduces defects. features CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC note: contact jst for details. nn nn nn current rating voltage rating temperature range contact resistance insulation resistance withstanding voltage 3a, ac, dc (2a for 37-circuits)(awg #20) 250v ac, dc - 40 ? c to + 85 ? c (including temperature rise in applying electrical current) initial value/15m ? max. after environmental testing/30m ? max. 5,000m ? min. 1,000v ac/minute standards CCCCCCCCCCCCCCCCCCCCCC 0 recognized e60389 1 certified lr20812
529 pin contact (for plug housing) CCCCCCCCC 16.3(.642) 5.8(.228) 3.6(.142) 1.0(.039) 1.9(.075) q ? ty / reel model no. pin contact applicable wire socket contact gold-plated tin-plated gold-plated awg # lnsulation o.d. mm(in.) *j-sp1140 j-sp2140 *j-sp1190 j-sp2190 *j-ss1340 j-ss2340 #24 to #20 #28 to #24 1.1 to1.8mm(.043" to .071") 0.9 to1.3mm(.035" to .051") 10,000 socket contact (for receptacle housing) CCC 15.3(.602) 4.25(.167) 3.6(.142) 1.4(.055) 1.9(.075) note: models marked * are not csa certified. plug housing CCCCCCCCCCCCCCCCCCCCCCC b c a [10.8(.425)] [10.7(.421)] 12.55(.494) 3.05 (.120)dia. 2.84(.112) 8.35(.329) 7.0(.276) 10 5.95 (.234) receptacle housing CCCCCCCCCCCCCCCCCC b c a 6.18 (.243) [10.9(.429)] [10.7(.421)] 12.55(.494) 3.05 (.120)dia. 2.84(.112) 7.9(.311) 7.0(.276) 10 cir- cuits abc dimensions mm(in.) 9 15 25 37 16.92( .666) 25.25( .994) 38.97(1.534) 55.43(2.182) 24.99( .984) 33.32(1.312) 47.04(1.852) 63.50(2.500) 30.80(1.213) 39.14(1.541) 53.04(2.088) 69.32(2.729) 16.34( .643) 24.67( .971) 38.38(1.511) 24.99( .984) 33.33(1.312) 47.04(1.852) 30.80(1.213) 39.14(1.541) 53.04(2.088) 9 15 25 jec- 9s jac-15s jbc-25s 100 100 50 model no. q ? ty / box jec- 9p jac-15p jbc-25p jcc-37p 100 100 50 50 cir- cuits abc dimensions mm(in.) model no. q ? ty / box d subminiature connector j series contact crimp applicator mks-l compact crimp applicator mks-ls strip-crimp applicator mks-sc with safety cover without safety cover with safety cover without safety cover with safety cover applicator for the semi-automatic press ap-k2n CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC kyyy hk2 hk2 aplsc j-sp/ss1 j-ss1*** aplmk j-sp/ss1 aplnc j-sp/ss1 aplsc j-sp/ss1 j-sp2*** aplmk j-sp/ss2 aplnc j-sp/ss2 aplsc j-sp/ss2 j-ss2*** aplmk j-sp/ss2 aplnc j-sp/ss2 aplsc j-sp/ss2

▲Up To Search▲

Price & Availability of JBY-25S-1A1A

	To Download JBY-25S-1A1A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .